NEC Express5800 User Manual page 414

E-14 Installing Windows Server 2008
14.
The folder reference dialog box appears.
Select a path in the NEC EXPRESSBUILDER DVD, and then click [OK].
If the N8103-109 RAID Controller is used:
– Windows Server 2008 32-bit (x86) Edition
<drive letter>:\015\win\winnt\oemfd\ws2008\fd1\stexstor
– Windows Server 2008 64-bit (x64) Edition
<drive letter>:\015\win\winnt\oemfd\ws2008x64\fd1\stexstor
If the N8103-116A/117A RAID Controller is used:
– Windows Server 2008 32-bit (x86) Edition
<drive letter>:\015\win\winnt\oemfd\ws2008\fd1\megasas
– Windows Server 2008 64-bit (x64) Edition
<drive letter>:\015\win\winnt\oemfd\ws2008x64\fd1\megasas
After you select the path, a list of drivers is displayed.
Select the following driver, and then click [OK]. Go to Step 15.
If the N8103-109 RAID Controller is used:
[Promise SuperTrak EX SAS RAID Controller]
If the N8103-116A/117A RAID Controller is used:
[LSI Logic MegaRAID SAS 8708EM2 RAID Controller]
15.
Remove the EXPRESSBUILDER and set Backup DVD-ROM or Windows Server 2008
DVD-ROM.
16.
Select the disk where a partition will be created, and then click [Drive Option].
IMPORTANT:
step 19.
17.
Click [New], enter a partition size, and then click [Apply].
18.
Select the partition created in step 17, and then click [Format].
If the partition has already been created, go to