NEC Express5800 User Manual page 244

7-8 Maintenance
7.
Follow the guide line shown at the bottom of the screen, and press the Esc key.
The [Enduser Menu] below is displayed.
TeDoLi (TEst & Diagnosis On Linux) Ver001.00 (Build020901.1.1m)
Please choose a function by the arrow key and push Enter key.
<Test Result> Shows the diagnostics completion screen of the above diagnostics.
<Device List> Shows a list of connected devices.
<Log Info>
<Option>
<Reboot>
8.
Select <Reboot> in the [Enduser Menu] above.
The server restarts and the system is started from the NEC EXPRESSBUILDER.
9.
Exit the NEC EXPRESSBUILDER, and remove the DVD from the optical disk drive.
10.
Power off the server and unplug the power cord from the receptacle.
11.
Reconnect all the LAN cables that have been disconnected in Step 2 to the server.
12.
Plug in the power cord.
This completes the system diagnostics.
Enduser Menu
Enduser Menu
<Test Result>
<Device List>
<Log Info>
<Option>
<Reboot>
Shows the log information of the diagnostics. Log information can be
saved.
To save it, connect a FAT formatted removable media, and select
<Save(F)>.
Optional features can be used from this menu.
Reboots the system.