MAINTENANCE TOOLS
The Maintenance Tools is a tool of this product prevention to maintain, and to analyze the trouble.
IMPORTANT: The explanation using the floppy disk drive has been
described in this book. However, the floppy disk drive is not built into
this product. Please use the Flash FDD or USB FDD.
Starting Maintenance Tools
The Maintenance Tools is started according to the following procedure.
1.
Turn on peripheral devices and the server in this order.
2.
Insert the NEC EXPRESSBUILDER DVD supplied with your server into the optical disk
drive of your server.
3.
Press Ctrl, Alt, and Delete to reboot the server from the NEC EXPRESSBUILDER.
(You may also turn off and then on again to reboot the server.)
System boots up displaying Boot selection menu.
IMPORTANT:
"Os installation" starts by the automatic after the Boot selection menu is
displayed.
An initial selection of the menu is "Os installation".
Troubleshooting 8-37