NEC Express5800 User Manual page 419

5. Change the password, and then click the
NOTE:
required.
More than 6 characters
Contains characters from three of the following categories (numbers,
uppercase letters, lowercase letters, and signs)
6. When the following message appears, click [OK].
7. At the command prompt, enter user information.
NOTE:
Server 2008 Step-By-Step Guide".
After installations is completed, be sure to execute the tasks described in "Setup of Device Driver
(Normally Install in Server)" and "Updating the System" of this chapter.
Administrator password that satisfy the next condition, are
For more detailed procedure, see the "Microsoft Windows
Installing Windows Server 2008 E-19
button.