NEC Express5800 User Manual page 170

Hide thumbs Also See for Express5800:
Table of Contents

Advertisement

5-56 Installing the Operating System with Express Setup
Service Pack Which EXPRESSBUILDER Supports
The NEC EXPRESSBUILDER DVD attached to the server supports following combination of the
OS installation media and Service Pack.
Windows Server 2003 R2 x64 Edition
– OS installation media (with Service Pack 2)
– OS installation media (No Service Pack) + Service Pack 2
– OS installation media (No Service Pack)
Windows Server 2003 R2
– OS installation media (with Service Pack 2)
– OS installation media (No Service Pack) + Service Pack 2
– OS installation media (No Service Pack)
Supported Mass Storage Controllers
The NEC EXPRESSBUILDER DVD attached to your system supports the following mass storage
controllers for installation.
NOTE: If you want to install the other boards by using a driver floppy
disk ("OEM-Disk for Mass storage device"), except ones listed below,
see "Installing with the OEM-Disk for Mass storage device" and
"Installing Optional Mass Storage Driver" of "Parameter File Creator"
in Chapter 6.
Controllers supporting installation of OS with Express Setup
– N8103-109 RAID Controller (128 MB, RAID0/1/5/6)*
– N8103-116A RAID Controller (128 MB, RAID0/1)*
– N8103-117A RAID Controller (128 MB, RAID0/1/5/6)*
– Onboard RAID Controller (LSI Embedded MegaRAID™)
Other controllers
– N8103-75 SCSI Controller*
– N8103-95 SCSI Controller*
– N8103-104A SAS Controller*
– N8103-107 SCSI Controller*
* Option
NOTES:
The driver of option card mentioned above is stored in the NEC
EXPRESSBUILDER DVD.
If you use the board not mentioned above, the ExpressSetup will
fail. Refer to the instructions attached to the board.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Exp260aExpressgt110bExpress5800/gt110b

Table of Contents