NEC Express5800 User Manual page 36

2-6 General Description
1 AC inlet
The AC inlet is connected with the power cord.
2 Fixing screws
Secures the side cover.
3 Cover lock plate
Installing a theft prevention device protects
the internal components of the server from
being stolen.
4 Mouse connector
The mouse connector is connected with the mouse coming with the server.
5 Keyboard connector
The keyboard connector is connected with keyboard coming with the server.
6 USB connectors
The USB connectors are connected with devices accepting the USB interface.
7 Serial port A connector
The serial port connector is used to connect the server to a device with the serial interface.
The server cannot be directly connected to a leased line through the connector.
Note: If N8117-01A is connected, the connector on N8117-01A side becomes serial port B
connector.
8 Display connector
The display connector is connected with the display unit.
9 LAN connector
The LAN connector is connected with a network system on LAN
(1000BASE-T/100BASETX/10BASE-T).
10 Link/ACT lamp
The Link/ACT lamp shows the LAN access status.
11 1000/100/10 lamp
1000/100/10 lamp indicates the LAN transfer rate.
12 Dump switch
Press this switch when collecting memory dump.
NOTE: Consult with your service representative before collecting memory dump. Collecting
memory dump while the server is in the successful operation may affect the system
operation.