NEC Express5800 User Manual page 474

G-10 Installing Windows Server 2003
11.
A list of mass storage devices is displayed.
Select the [Adaptec Ultra160 SCSI Cards (Win Server 2003)] and press Enter.
IMPORTANT:
the N8103-95 SCSI controller, press S.
The screen of Step 5 is displayed.
Go to Step 12.
12.
<If the SAS Controller N8103-104A is connected>
Press S.
IMPORTANT:
Insert the Windows Server 2003 OEM-Disk for
EXPRESSBUILDER into the floppy disk drive. If the floppy disk
drive has already contained Windows Server 2003 OEM-Disk for
EXPRESSBUILDER, you do not need to insert the Windows Server
2003 OEM-Disk for EXPRESSBUILDER.
If you have created the OEM-Disk into the Flash FDD, connect the
Flash FDD before you start the system.
The screen of Step 6 is displayed. Press Enter, and go to Step 13.
<If the SAS Controller N8103-104A is not connected>
Press Enter, and go to Step 14.
13.
A list of mass storage devices is displayed.
Select the [LSI Fusion-MPT SAS Driver (Server 2003 32-bit)] and press Enter.
The screen of Step 5 is displayed.
Press Enter, and go to Step 14.
If the following message is displayed when you use
The driver you provided seems to be newer
than the Windows default driver.
Windows already has a driver that you can use
for "Adaptec Ultra 160 SCSI Cards (Win Server
2003)"
Unless the device manufacturer prefers that
you use the driver on the floppy disk, you
should use the driver in Windows.