9-56 Upgrading Your Server
Optical Disk Drive
You may replace the factory-installed optical disk drive with an optional DVD SuperMULTI drive.
IMPORTANT: Be sure to use the DVD SuperMULTI drive authorized
by NEC.
Replacement Procedure
Take the following steps to install the optional DVD SuperMULTI drive.
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Remove the side cover and front bezel.
3.
Disconnect all the interface and power cables from the factory-installed optical disk drive.
4.
Remove the two screws securing the left side of the factory-installed optical disk drive.
Screw Set 504