NEC Express5800 User Manual page 309

Installation
Follow the procedure as described below to install 2.5-inch hard disk drive cage.
1.
Configure the operation mode of hard disk drives according to the manual supplied with
the hard disk drive.
<When using the SATA hard disk drive>
Hard disk drive
First hard disk drive
Second hard disk drive
Third hard disk drive
Fourth hard disk drive
<When using the SAS hard disk drive>
Hard disk drive
First hard disk drive
Second hard disk drive
Third hard disk drive
Fourth hard disk drive
Cage to Install Serial ATA connector on mother board
Slot 0 Serial ATA connector 0
Slot 1 Serial ATA connector 1
Slot 2 Serial ATA connector 2
Slot 3 Serial ATA connector 3
Mother board
Cage to Install SAS connector on SAS RAID Controller
Slot 0 SAS RAID Controller
(N8103-109F/116F/117F)
Slot 1
Slot 2
Slot 3
Upgrading Your Server 9-19
Serial ATA connector 0
Serial ATA connector 1
Serial ATA connector 3
Serial ATA connector 2