Optical Disk Drive - NEC Express5800 User Manual

2-20 General Description

Optical Disk Drive

The optical disk drive is installed in the front of the server. One of the following optical disk drives
can be used.
DVD-ROM drive (factory-installed)
Reads data from various optical disks.
DVD Super MULTI drive (option)
Reads or writes data of various optical disks.
Observe the following instructions to use the server safely. Failure to follow
these instructions may cause a fire, personal injury, or property damage. See
pages 1-2 to 1-11 for details.
Precautions
Observe the following instructions when using the server. The server itself or your property (data
and other devices) might be destroyed if you use the server disregarding these instructions.
Use of the Optical Disk
Keep the following notes in mind to use the optical disk for the server:
For the disk which does not conform to the CD standard, the playback of such a disk with
the optical disk drive is not guaranteed.
Do not drop the optical disk.
Do not place anything on the optical disk or bend the optical disk.
Do not attach any label onto the optical disk.
Do not touch the signal side (nothing is printed on this side) with your hand.
Place the optical disk with its printed side upward and gently put it on the tray.
Do not scratch the optical disk or write anything directly on it with a pencil or ball-point
pen.
Keep the optical disk away from cigarette smoke.
Do not leave the optical disk in a high-temperature place (e.g., place exposed to direct
sunlight or close to a heater).
When dust or fingerprints are attached on the optical disk, wipe the optical disk from its
center to edge with a dry soft cloth slowly and gently.
Use the dedicated cleaner to clean the optical disk. Do not use record spray/cleaner,
benzene, or thinner.
Do not leave the tray ejected from the optical disk drive.
CAUTION