Console Redirection - NEC Express5800 User Manual

4-20 Configuring Your Server

Console Redirection

Option
Console
Redirection
Baud Rate
Flow Control
Terminal Type
Continue
Redirection after
POST
Remote Console
Reset
DMI Event Logging
Option
Event log validity
Event log
capability
View DMI event
log
Event logging
Clear all DMI
event logs
Parameter
[Disabled]
Serial Port A
Serial Port B
9600
[19.2K]
38.4K
57.6K
115.2K
None
Xon/Xoff
[CTS/RTS]
PC ANSI
[VT100+]
VT-UTF8
Disabled
[Enabled]
[Disabled]
Enabled
Parameter
–
–
–
[Enabled]
Disabled
[No]
Yes
Description
Specify the address/interrupt of the
serial port to which a remote console
is connected.
Specify the baud rate used for the
interface with the remote console
connected.
Specify the flow control method.
Specify the type of remote console.
Specify whether to continue console
redirection feature after completion of
POST.
Specify whether to enable or disable
resetting by Escape command (Esc
R) sent from the remote console.
If the server is connected with the
management PC that uses NEC
ESMPRO Manager, this option is
always enabled even if "Disabled" is
specified here.
Description
Displays the status of event logs
stored in the system.
Displays the free space for storing
event logs.
Press Enter to display the event logs
stored in the system. See Chapter 8
"Troubleshooting" for the meanings of
the event logs and the recommended
action to take.
Specify whether to store the event log
or not.
When set to [Yes] and reboot the
system, the stored event logs are
cleared.
Your Setting
[ ]: Factory-set
Your Setting
[ ]: Factory-set