NEC Express5800 User Manual page 442

F-8 Installing Windows Server 2003 x64 Editions
6.
The following message is displayed.
manufacturer-supplied hardware support disk
Insert the Windows Server 2003 x64 Edition OEM-Disk for EXPRESSBUILDER into the
floppy disk drive, and press Enter.
A list of mass storage devices is displayed.
NOTE: If you use the Flash FDD, the message above is not displayed.
7.
Select the proper RAID Controller and press Enter.
The screen of Step 5 is displayed.
– [LSI MegaRAID SAS RAID Controller Driver (Server 2003 for x64)]
(When N8103-116A/117A RAID Controller is installed.)
– [Promise SuperTrak EX Family Controller -64bits platform]
(When N8103-109 RAID Controller is installed.)
– [LSI Embedded MegaRAID (Windows XP/2003 64-bit)]
(When Onboard RAID Controller (LSI Embedded MegaRAID™) is used.)
8.
<If the SCSI Controller N8103-75/107 is connected>
Press S.
IMPORTANT:
Insert the Windows Server 2003 x64 Edition OEM-Disk for
EXPRESSBUILDER into the floppy disk drive. If the floppy disk
drive has already contained Windows Server 2003 x64 Edition
OEM-Disk for EXPRESSBUILDER, you do not need to insert the
Windows Server 2003 x64 Edition OEM-Disk for
EXPRESSBUILDER.
If you have created the OEM-Disk into the Flash FDD, connect the
Flash FDD before you start the system.
The screen of Step 6 is displayed. Press Enter, and go to Step 9.
<If the SCSI Controller N8103-75/107 is not connected>
Go to Step 10.
Please insert the disk labeled
into Drive A:
*Press ENTER when ready.