NEC Express5800 User Manual page 78

4-12 Configuring Your Server
Advanced
Option
Boot-time Diagnostic
Screen
Reset Configuration Data
NumLock
Memory Error
IMPORTANT:
"Yes" for [Reset Configuration Data], because the information on boot
device will be cleared. Select [Exit Saving Changes] to restart the
system, run BIOS SETUP utility, and provide settings for boot device
order again.
Parameter Description
Enabled When enabled, the BIOS will display
the POST progress.
[Disabled]
When disabled, the BIOS will
display the NEC logo during POST.
Cannot be disabled during console
redirection.
[No] Select "Yes" if you want to clear the
system configuration data during the
Yes
next boot. Automatically reset to
"No" in the next boot.
Enables or disables Numlock
On
feature at system startup.
[Off]
[Boot] This option is used to specify
whether the system stops at the end
Halt
of POST when a memory error has
been detected during POST.
This option is enabled when [POST
Error Pause] on the [Server] menu
is set to [Enabled]. If there is no
usable memory in the system, the
system will stop at the end of POST
even if [Boot] is specified for this
option.
Be sure to take a note of boot priority before selecting
Your Setting
[ ]: Factory-set