Power Cord And Attachments; Ventilation - Christie Roadster User Manual

Maintenance
Power Cord 
and Attachments
Ventilation 
4-4
Use only lamps supplied by Christie. Use lamps of the correct
wattage for your projector model when replacing.
Use Christie approved filters ONLY.
Replace the filter when you replace the lamp or sooner if required. It is
FILTER:
important the filter be replaced regularly to ensure sufficient airflow through the
projector, otherwise it could cause the projector to overheat.
See 4.4, Lamp and Filter Replacement for the complete replacement procedure.
The North American rated line cord is provided with each projector. Ensure
that you are using a line cord that meets the appropriate rating standards.
Only use attachments or accessories recommended by Christie, such as the specific
power cord supplied. Use of other attachments or accessories with this projector may
result in the risk of fire, shock or personal injury.
Use only an AC power cord recommended by Christie. Do not
attempt operation if the AC supply and cord are not within the

Do not allow anything to rest on the power cord. Locate the projector where
persons walking on it or objects rolling over it cannot abuse the cord.

Operate the projector at the specified voltage only. Do not overload power outlets
and extension cords as this can result in fire or shock hazards.

The projector is equipped with a three-wire plug having a third (grounding) pin.
This is a safety feature. If you are unable to insert the plug into the outlet, contact
an electrician to have the outlet replaced. Do not defeat the safety purpose of the
grounding-type plug.
Slots and vents in the projector provide ventilation. Never block or cover these
openings. This ensures reliable operation of the projector and prevents overheating.

Do not place the projector over a radiator or heat register. The projector should
not be placed in an enclosure unless proper ventilation is provided.

Do not insert objects into the ventilation openings of the projector. They may
touch dangerous voltages or short-out components resulting in a fire or shock
hazard. Do not spill liquids of any kind into the projector. Should an accidental
spill occur, immediately unplug the projector and have it serviced by a qualified
service technician.
WARNING
WARNING
WARNING
specified voltage and power range.
Roadster, Matrix WU, Mirage S+/HD/WU User Manual
020-100002-05 Rev. 1 (02-2010)