How To Load Documents; Loading Documents; Preparation - Fujitsu SP-1130Ne Operator's Manual

How to Load Documents

This section explains how to load documents on the scanner.

Loading Documents

This section explains how to load documents of normal paper.

Preparation

When you load multiple documents in the ADF paper chute (feeder), make the following preparations.
HINT
For details about the paper size and quality required for normal operations, refer to
(page 50).
1
Check the documents.
a
Check whether the documents to be loaded are of the same width or not.
Ways to load documents differ depending on whether the documents are of the same width or not.
If the documents are of different width, refer to
Scanning Documents with Different Widths (page
b
Check the number of sheets.
Up to 50 sheets can be loaded (with paper weight of 80 g/m
stack under 5 mm).
For details, refer to
2
Fan the documents.
a
Grab a stack of documents, which should be 5 mm or less.
Loading Capacity (page 54).
45
Documents for Scanning
Conditions for Mixed Batch Scanning (page 57)
60).
2
[20 lb] and thickness of the document
or