Performing Copy Management Procedures; Registering New Department Codes - Oce OP30C Operation Manual

(3) Performing copy management procedures

Registering new department codes

1 Display the "Copy Management" screen. (See page 7-3.)
2 Use the M cursor or the N cursor key to select
"x Management Setting" ["x COPY MGMT SETTING"].
Inch specifications
Metric specifications
3 Press the Enter key.
Use the M cursor or the N cursor key to select "x Register".
4
Inch specifications
Metric specifications
5 Press the Enter key.
6 Use the numeric keys on the keypad to enter the department
code that you want to register.
Inch specifications
Metric specifications
Section 7 COPIER MANAGEMENT
Use the N cursor key to highlight the maximum number of
7
copies.
Inch specifications
Metric specifications
8 Use the numeric keys on the keypad to enter the maximum
number of copies that can be made under that department
code. The copy limit can be set to any 1 page increment
between 1 and 999,999.
Inch specifications
NOTES
• Enter "0" if you want to enable unlimited copying under that
department code.
• Press the Stop/Clear key if you want to clear the registered
department code and enter a new code.
9 Press the Enter key.
The message display will return to the screen in step 6.
NOTE
If you want to register another department code, repeat steps 6
through 8.
10 Press the Stop/Clear key.
The message display will return to the screen in step 4.
Metric specifications
7-4