Making Booklets, Etc. From Book Originals [Book To Book Mode] (Only Available In Duplex Copiers) - Oce OP30C Operation Manual

Oce printer
Hide thumbs Also See for OP30C:
Table of Contents

Advertisement

15. Making booklets, etc. from book originals [Book to Book mode]
(Only available in duplex copiers)
With this mode, you can use open-faced originals (books, etc.) to
make open-faced two-sided copies in such a way that the finished
copies can be stacked and folded into a booklet format.
NOTES
• This mode is only available in duplex copiers.
• If the number of originals is not a multiple of four, the last page(s) of
the copies will come out blank.
• 2-sided copies cannot be made automatically when paper is being
fed from the multi-bypass tray.
1 If "Right" is selected as the page sequence...
Copying will be performed so that the stacked and folded pages of
the finished copies read from right to left.
2 If "Left" is selected as the page sequence...
Copying will be performed so that the stacked and folded pages of
the finished copies read from left to right.
1
Press the Book Mode key to light the corresponding
indicator.
Inch specifications
2
Use the M cursor or the N cursor key to select "z Booklet"
and then press the Enter key.
Inch specifications
Metric specifications
Use the M cursor or the N cursor key to select "x Book-
3
Book" ["x BOOK>BOOK"] again and then press the Enter
key. The "Select copy stitch side" ["SELECT COPY BINDING
SIDE"] screen will appear.
Inch specifications
Metric specifications
Section 6 FUNCTIONS
Metric specifications
6-36

Advertisement

Table of Contents
loading

Table of Contents