Deleting Department Codes - Oce OP30C Operation Manual

Section 7 COPIER MANAGEMENT
Use the M cursor key to select "z End" and then press the
11
Enter key. The message display will return to the screen in
step 2.
Inch specifications
Metric specifications
12 Use the M cursor key to select "z End" once again and then
press the Enter key.
The message display will return to the "Ready to copy."
screen.
Inch specifications
Metric specifications

Deleting department codes

1 Display the "Copy Management" screen. (See page 7-3.)
Use the M cursor or the N cursor key to select "x
2
Management Setting" ["x COPY MGMT SETTING"].
Inch specifications
Metric specifications
3 Press the Enter key.
7-5
Use the M cursor or the N cursor key to select "c Delete
4
Code" ["c CODE DELETE"].
Inch specifications
Metric specifications
5 Press the Enter key.
6 Use the numeric keys on the keypad to enter the department
code that you want to delete.
Inch specifications
Metric specifications
7 Press the Enter key.
8 A message asking you to confirm whether or not you really
want to delete that department code will appear.
• If you DO want to delete that department code, use the M
cursor key to select "Yes" and then press the Enter key.
• If you do NOT want to delete that code, make sure that
"No" is selected and press the Enter key. The message
display will return to the screen in step 6.
Inch specifications
Metric specifications