Oce OP30C Operation Manual page 142

Section 9 TROUBLESHOOTING
3 Turn the green transfer unit release lever to the left until it
reaches a vertical position.
Grasp the transfer unit handle (shown as 1 in the
4
illustration) and pull the transfer unit out towards you as far
as it will go.
1
5 Remove the jammed paper without tearing it. If the paper is
difficult to remove at all, turn the black paper feed dial
(shown as 2 in the illustration) towards you. The misfed
paper will be fed out to a location that makes it easier to
remove.
* If the paper does happen to tear, remove any loose scraps
from inside the copier.
9-9
IMPORTANT!
The drum (shown as 3 in the illustration) is extremely sensitive to
dirt. Do not to touch the drum with your hands.
2
6 Replace the transfer unit in its original position in the copier.
Push down on the release lock (shown as 4 in the
7
illustration) and replace the transfer unit release lever into its
original position in the copier.
4
3