Oce OP30C Operation Manual page 51

4 Use the Zoom(+) or Zoom(-) key to specify the desired ratio
for the width of the image. It is also possible for you to enter
the ratio directly using the numeric keys on the keypad.
Inch specifications
Metric specifications
5 Press the N cursor key to change to the length ratio setting.
6 Use the Zoom(+) or Zoom(-) key to specify the desired ratio
for the length of the image. It is also possible for you to enter
the ratio directly using the numeric keys on the keypad.
Inch specifications
Metric specifications
7 Press the Enter key. The XY zoom mode will be selected and
the designated magnification ratios set, and an asterisk (
will appear in front of the number for that setting.
Inch specifications
)
Metric specifications
Use the M cursor key to select "z Enter" and then press the
8
Enter key. The message display will return to the "Ready to
copy." screen.
Inch specifications
9
Press the Start key to begin the copying procedure.
Inch specifications
Section 6 FUNCTIONS
Metric specifications
Metric specifications
6-4