Making Copies When Copy Management Is Turned On - Oce OP30C Operation Manual

Section 7 COPIER MANAGEMENT
5 Press the Enter key.
The display will return to the screen in step 2.
Use the M cursor key to select "z End" and then press the
6
Enter key.
• If you selected "z On" in step 4, the department code entry
screen will appear.
• If you selected "x Off" in step 4, the message display will
return to the "Ready to copy." screen.
Inch specifications
Metric specifications
7-11
(4) Making copies when copy management is
turned ON
When copy management is turned ON, "Enter 7-digit code with #
keys." ["ENTER 4-DIGIT CODE WITH #-KEYS"] will appear on the
message display.
Inch specifications
Metric specifications
1 Use the numeric keys on the keypad to enter your
designated department code.
Inch specifications
2 If "Ready to copy." appears, copying is possible in the usual
manner.
NOTES
• If the auto clear function (see page 2-5) engages, the message
display will return to the "Ready to copy." screen.
• Once you are finished copying, press the Energy Saver key in order
to engage copy management again.
Metric specifications