Eject Destination; Acs Adjustment; Auto Color Adjustment - Oce OP30C Operation Manual

) Eject destination

Use the M cursor or the N cursor key to select either
1
"z Inner Eject" (copy storage table) or "x Side Eject"
(copy eject tray).
Inch specifications
Metric specifications
2 Press the Enter key.

⁄ ACS adjustment

1 Press the O cursor or the P cursor key to move the cursor
on the exposure scale. Move the cursor to the right to make
black and white copies even if there is a small amount of
color in the original, and to the left to have color copies made
even if there is a large volume of black and white in the
original.
Inch specifications
Metric specifications
2 Press the Enter key.
Section 7 COPIER MANAGEMENT
¤ Auto color adjustment
1 Make sure that there is 11" x 8
of the drawers.
2 Use the M cursor or the N cursor key to select the image
quality that you want to adjust the color for.
Inch specifications
Metric specifications
3 Press the Enter key.
The "Begin Auto Calibration" ["START AUTO CALIBRATION"]
screen will appear.
Inch specifications
Metric specifications
4 Press the Start key.
A PG color pattern will be printed out.
Inch specifications
" [A4] paper loaded in one
1/2
Metric specifications
7-22