Printing Page Numbers On Copies [Print Page Numbers Mode] - Oce OP30C Operation Manual

Section 6 FUNCTIONS

9. Printing page numbers on copies [Print page numbers mode]

When you make copies from multiple originals, you can have page
numbers assigned to the corresponding copies in numerical order
from the first original. There are three styles of page numbers to
choose from: "-1-", "P.1" and "1/5".
NOTES
• Page numbers will be printed in black in the position shown in the
illustration.
• If you select "1/5" as the style of page number, the total number of
pages will be printed as the denominator.
• The setting for the page on which page numbers will start to be
printed can be selected to any number, except for "0", between "-10"
and "900".
• The print page number mode is NOT available for use together with
the zoom mode, preset zoom mode or XY zoom mode.
• If you do not have a Memory Copy Board installed as standard
equipment, the optional Memory Copy Board must be installed in
your copier in order to use this mode.
1 Set the original to be copied.
NOTE
Set originals as shown in the illustration.
6-19
2 Press the Digital Editing key to light the corresponding
indicator.
Inch specifications
3 Use the M cursor or the N cursor key to select ", Page
No." ["PAGE #"] and then press the Enter key.
The "Select Page # style" ["SELECT PAGE NUMBER TYPE"]
screen will appear.
Inch specifications
Metric specifications
4 Use the M cursor or the N cursor key to select the style of
page numbers that you want to be used.
Inch specifications
Metric specifications
5 Press the Enter key.
Metric specifications