Default Drawer (Color); Copy Limit; Margin Width; Erased Border Width - Oce OP30C Operation Manual

# Default drawer (color)

Use the M cursor or the N cursor key to select the location
1
(a drawer or the multi-bypass tray) that will be automatically
selected for feeding paper in color copying.
* The "1 paper" ["SOURCE 1"] drawer is not available in
duplex copiers.
Inch specifications
Metric specifications
2 Press the Enter key.

$ Copy limit

1
Use the numeric keys on the keypad to enter the maximum
number of copies can be made at one time.
Inch specifications
Metric specifications
2 Press the Enter key.
Section 7 COPIER MANAGEMENT

% Margin width

Press the O cursor or the P cursor key to select the default
1
margin width. (The width can be set to any 1/8" increment
between 1/4" and 3/4" [any 1 mm increment between 6 mm
and 18 mm].)
Inch specifications
Metric specifications
2 Press the Enter key.

^ Erased border width

Use the M cursor or the N cursor key to select the default
1
width of the border to be erased. (The width can be set to
either 1/4", 1/2" or 3/4" [6 mm, 12 mm or 18 mm].)
Inch specifications
Metric specifications
2 Press the Enter key.
7-20