Oce OP30C Operation Manual page 57

Use the M cursor or the N cursor key to select "x Page
3
separation" and then press the Enter key.
The "Select 1-sided copy mode." screen will appear.
Inch specifications
Metric specifications
4
Use the cursor or the
separation mode that you want to use.
Inch specifications
Metric specifications
5 Press the Enter key.
• If you selected "z 2-sided to 1-sided" ["z DUPLEX >
1-SIDED"], the message display will return to the "Ready to
copy." screen.
• If you selected "x Book original", go to the next step.
Use the M cursor or the N cursor key to select the binding
6
direction of the original being copied.
Inch specifications
Metric specifications
cursor key to select the page
7 Press the Enter key.
The message display will return to the "Ready to copy."
screen.
8 Press the Start key to begin the copying procedure.
Inch specifications
Section 6 FUNCTIONS
Metric specifications
6-10