Preparations; Section 3 Preparations; Loading Paper; Note When Adding Paper - Oce OP30C Operation Manual

Section 3

1. Loading paper

Copy paper can either be loaded into the drawer(s) or set on the
multi-bypass tray.

(1) Note when adding paper

After taking new paper out of its packaging, be sure to fan through
them a few times to separate the sheets before loading the paper into
a drawer or setting it on the multi-bypass tray.

(2) Loading paper into a drawer

Up to 500 sheets of standard paper (75 g/m
can be loaded into the drawer that is included with your copier. Up to
250 sheets of paper can be loaded into each drawer of the optional
Paper Feeder.
• Standard accessory drawer(s)
Standard copier (for 1-sided copies only):
Two 500-sheet capacity drawers
Duplex copier (for 2-sided copies): One 500-sheet capacity drawer
• Acceptable sizes of paper
Inch specifications
500-sheet capacity drawers: 11" x 8
250-sheet capacity drawers: 8
Metric specifications
500-sheet capacity drawers: A5R, B5R, A4, B4 and A3
250-sheet capacity drawers: A5R, B5R, A4R, A4, B4 and A3
* The 500-sheet capacity drawers will not accept 8
size paper.
* Neither type of drawer will accept 5
paper.
IMPORTANT!
• BE SURE to use paper that is specified for color copy use in order
to make clear color copies.
• DO NOT use paper such as that designated for inkjet printers or any
paper treated with special coating.
• Specify the type of paper that is loaded into each drawer (plain,
recycled, etc.) under "% Type of paper" on page 7-31.
3-1

PREPARATIONS

2 – 90 g/m 2 ) or color paper
", 8 " x 14" and 11" x 17"
1/2 1/2
" x 11", 11" x 8 ", 8 " x 14" and
1/2 1/2 1/2
11" x 17"
" x 11" [A4R]
1/2
" x 8 " or 8 " x 5
1/2 1/2 1/2 1/2
1 Pull the drawer out toward you as far as it will go.
* DO NOT pull more than one drawer out at a time.
Open the paper feed unit (shown as 1 in the illustration).
2
NOTE
DO NOT touch the rollers (shown as 2 in the illustration).
" size
1
2