Auto Shut-Off Function; More About The Auto Shut-Off Function - Oce OP30C Operation Manual

24. Auto shut-off function

This function automatically turns the main switch OFF (
operation has been performed on the copier for a certain period of
time (15 to 240 minutes).
When you want to make copies again, turn the main switch back
ON ( | ).

More about the auto shut-off function

The auto shut-off function is a power-saving feature which
automatically turns the main switch to the copier OFF (
certain time elapses without any operation being performed.
Copiers are generally in a standby mode more than they are in actual
operation, so power consumption in the standby mode occupies a
large part of overall consumption. Having the copier turned OFF (
automatically after a certain amount of time reduces unnecessary
power consumption in the standby mode or at night if the copier
happens to be left on accidentally. The result is a lower electricity bill.
* In order to change the amount of time that will elapse before the
auto shut-off function engages, see "8 Auto shut-off time" on page
7-29. In order to disable the auto shut-off function, see "3 Auto
shut-off ON/OFF" on page 7-28.
* If the optional Printer Kit is installed in your copier, the copier will
enter the energy-saving preheat mode rather than being turned off
completely whenever the auto shut-off function engages. In this
state, when the copier detects data for a print job, it will
automatically recover to a print-ready state and print out of the
corresponding information will begin.
* (Inch specifications copiers only)
If the optional Fax Kit is installed in your copier, the copier will be
automatically turned OFF (
engages. In this state, when the copier receives an incoming fax, it
will automatically recover to a print-ready state and print out of the
corresponding information will begin.
) if no
) when a
) whenever the auto shut-off function
)
Section 6 FUNCTIONS
6-48