Clearing Copy Counts - Oce OP30C Operation Manual

Section 7 COPIER MANAGEMENT
7 Press the Enter key.
8 Use the numeric keys on the keypad to enter the new copy
limit for that department code.
The copy limit can be set to any 1 page increment between
1 and 999,999.
Inch specifications
NOTE
Enter "0" if you want to enable unlimited copying under that
department code.
9 Press the Enter key.
The display will return to the screen in step 6.
NOTE
If you want to change the copy limit for another department code,
repeat steps 6 through 9.
10 Press the Stop/Clear key.
The message display will return to the screen in step 4.
11 Use the M cursor key to select "z End" and then press the
Enter key.
The message display will return to the screen in step 2.
Inch specifications
Metric specifications
7-7
Metric specifications
Use the M cursor key to select "z End" once again and then
12
press the Enter key.
The message display will return to the "Ready to copy."
screen.
Inch specifications
Metric specifications

Clearing copy counts

1 Display the "Copy Management" screen. (See page 7-3.)
2 Use the M cursor or the N cursor key to select
"x Management Setting" ["x COPY MGMT SETTING"].
Inch specifications
Metric specifications
3 Press the Enter key.
Use the M cursor or the N cursor key to select "b Delete
4
Count" ["b COUNTS CLEAR"].
Inch specifications
Metric specifications
5 Press the Enter key.