Oce OP30C Operation Manual page 108

Section 7 COPIER MANAGEMENT
Default setting
7 Print original density
Adjusts the exposure of the original when the printed
photo mode is selected for the image quality
(page 4-3).
8 Photo original density
Adjusts the exposure of the original when the photo
mode is selected for the image quality (page 4-3).
9 Map original density
Adjusts the exposure of the original when the map
mode is selected for the image quality (page 4-3).
0 Copy mode
Sets the default mode for color copying (page 4-1).
! Original quality
Sets the default mode for the image quality
(page 4-3).
@ Default drawer (b/w)
Sets the location (a drawer or the multi-bypass tray)
that will be automatically selected at the end of
warm-up, or when the Reset key is pressed, for
feeding paper in black and white copying.
* No.3 and No.4 drawers can only be selected when
7-13
Description
the optional Paper Feeder is installed in your
copier.
Available settings
1 – 7 4 (middle setting)
1 – 7 4 (middle setting)
1 – 7 4 (middle setting)
Full-Color
Full-Color
[FULL COLOUR] / [FULL COLOUR]
Black & White /
Auto color selection
[AUTO COLOUR
SELECTION]
Mixed Mixed
Text
Photo
Print
Map
Eco
Standard copiers Standard
1 paper [SOURCE 1] – copiers
4 paper [SOURCE 4] 1 paper
[SOURCE 1]
Duplex copiers
2 paper [SOURCE 2] – Duplex copiers
4 paper [SOURCE 4] 2 paper
[SOURCE 2]
Factory Reference
setting page
7-18
7-18
7-19
7-19
7-19
7-19