Oce OP30C Operation Manual page 67

Oce printer
Hide thumbs Also See for OP30C:
Table of Contents

Advertisement

6
If you want to change the page on which page numbers will
start to be print, use the numeric keys on the keypad or
press the O cursor or the P key to change the setting to that
desired.
Inch specifications
Metric specifications
NOTES
• The setting for the page on which page numbers will start to be print
can be selected to any number, except for "0", between "-10" and
"900".
• If you enter a minus (-) number, page numbers will not be printed on
that many pages. After copying is completed on that number of
pages, printed page numbers will be started from page 1.
For example, to start printing from the third original, select "-2".
7
Press the Enter key.
8
Use the M cursor key to select "z Enter" and then press the
Enter key. The message display will return to the "Ready to
copy." screen.
9
Press the Start key. Scanning of the original will start.
• If you set the originals in the optional DF, copying will start
automatically.
• If you set the original on the platen, go to the next step.
Inch specifications
Metric specifications
10
Replace the first original with the next one and press the
Start key. Scanning of that next original will start.
Carry out this step for all of the originals that you want to
copy and, once you have finished scanning them all, press
the Enter key. Copying will start.
Inch specifications
Section 6 FUNCTIONS
Metric specifications
6-20

Advertisement

Table of Contents
loading

Table of Contents