Oce OP30C Operation Manual page 63

2 Press the Digital Editing key to light the corresponding
indicator.
Inch specifications
3 Use the M cursor or the N cursor key to select "c Border
Erase" and then press the Enter key.
The "Select Erase effect" screen will appear.
Inch specifications
Metric specifications
Use the M cursor or the N cursor key to select the border
4
erase mode that you want to use.
Inch specifications
Metric specifications
Metric specifications
5 Press the Enter key.
• If you selected "z Sheet Erase" or "x Book Erase", go to
the next step.
• If you selected "c Custom Sheet", go directly to step 8.
NOTE
In order to use the "c Custom Sheet" setting, the size of the original
that is being copied must be registered in advance. (See "& Custom
erase size" on page 7-21.)
Use the M cursor or the N cursor key to select the width of
6
the border that you want to have erased.
Inch specifications
Metric specifications
NOTES
• The width of the border to be erased can be set to either 1/4", 1/2"
or 3/4" [6 mm, 12 mm or 18 mm].
• The arrow (>) indicates the current setting.
7 Press the Enter key.
8 Use the M cursor key to select "z Enter" and then press the
Enter key. The message display will return to the "Ready to
copy." screen.
Section 6 FUNCTIONS
6-16