Oce OP30C Operation Manual page 78

Section 6 FUNCTIONS
27 Press the Start key. Scanning of the originals will start.
• If you set the originals in the optional DF, copying will start
automatically.
• If you set the original on the platen, go to the next step.
Inch specifications
28 Replace the first original with the next one and press the
Start key. Scanning of that next original will start.
Carry out this step for all of the originals that you want to
copy and, once you have finished scanning them all, press
the Enter key. Copying will start.
Inch specifications
6-31
Metric specifications
Metric specifications