Software Factory Defaults - Allied Telesis AT-9108 User Manual

Software Factory Defaults

Software Factory Defaults
Item
Serial or Telnet user account
Web network management
SNMP read community string
SNMP write community string
RMON
BOOTP
QoS
QoS monitoring
802.1p priority
802.3x flow control
Virtual LANs
802.1Q tagging
Spanning Tree Protocol
Forwarding database aging period
IP Routing
RIP
OSPF
IP multicast routing
IGMP snooping
DVMRP
GVRP
1-8
Table 1-1 shows factory defaults for global software features.
Table 1-1 Gigabit Switches Global Factory Defaults
Default Setting
admin with no password and user with no password
Enabled
public
private
Disabled
Enabled on the default VLAN (default)
All traffic is part of the default queue in ingress mode
Automatic roving
Recognition enabled
Enabled on Gigabit Ethernet ports
One VLAN named default; all ports belong to the default
VLAN; the default VLAN belongs to the STPD named s0
All packets are untagged on the default VLAN (default)
Disabled for the switch; enabled for each port in the
STPD
300 seconds (5 minutes)
Disabled
Disabled
Disabled
Disabled
Enabled
Disabled
Disabled