Resetting And Disabling Rip - Allied Telesis AT-9108 User Manual

Resetting and Disabling RIP

Command
config rip delete [vlan <name> | all] Disables RIP on an IP interface. When RIP is disabled on
disable rip
disable rip aggregation
disable rip splithorizon
disable rip poisonreverse
disable rip triggerupdate
disable rip export static
disable rip export osfp
unconfig rip {vlan <name>}
To return RIP settings to their defaults, or to disable RIP, use the
commands listed in
Table 9-4 RIP Reset and Disable Commands
Description
the interface, the parameters are not reset to their
defaults.
Disables RIP.
Disables the RIP aggregation of subnet information on a
RIP v2 interface.
Disables split horizon.
Disables poison reverse.
Disables triggered updates.
Disables the filtering of static routes.
Disables the distribution of OSPF routes into the RIP
domain.
Resets all RIP parameters to match the default VLAN.
Does not change the enable/disable state of the RIP
settings. If no VLAN is specified, all VLANs are reset.
AT-9108, AT-8518, AT-8525, and AT-8550 User's Guide
Table 9-4.
9-17