Table of Contents
Advertisement
IP Multinetting
IP Multinetting
Examples
8-10
10. Enable IP multinetting, by using the following command:
enable multinetting
11. If you are using RIP, disable RIP on the dummy VLANs, by using the
following command:
config rip delete net22
Multinetted VLAN groups must contain identical port assignments.
The following example configures the switch to have one
multinetted segment (port 5) that contains three subnets
(192.67.34.0, 192.67.35.0, and 192.67.37.0).
config default delete port 5
create protocol mnet
create vlan net34
create vlan net35
create vlan net37
config net34 ipaddress 192.67.34.1
config net35 ipaddress 192.67.35.1
config net37 ipaddress 192.67.37.1
config net34 protocol ip
config net35 protocol mnet
config net37 protocol mnet
config net34 add port 5
config net35 add port 5
config net37 add port 5
enable ipforwarding
enable multinetting
Note
Advertisement
Table of Contents
