Protocol-Based Vlans - Allied Telesis AT-9108 User Manual

Types of VLANs
Command
enable gvrp
config gvrp {listen | send | both |
none} {port <portlist>}
disable gvrp
show gvrp
Protocol-Based
VLANs
4-10
GVRP Commands.
Table 4-1
Table 4-1 GVRP Commands
Description
Enables the Generic VLAN Registration Protocol (GVRP).
The default setting is disabled.
Configures the sending and receiving GVRP information
one or all a ports. Options include the following:
listen — Receive GVRP packets.
send — Send GVRP packets.
both — Send and receive GVRP packets.
none — Disable the port from participating in GVRP
operation.
The default setting is
Disables the Generic VLAN Registration Protocol
(GVRP).
Displays the current configuration and status of GVRP.
Protocol-based VLANs enable you to define a packet filter that the
switch uses as the matching criteria to determine if a particular
packet belongs to a particular VLAN.
Protocol-based VLANs are most often used in situations where
network segments contain hosts running multiple protocols. For
example, in Figure 4-7, the hosts are running both the IP and
NetBIOS protocols.
The IP traffic has been divided into two IP subnets, 192.207.35.0 and
192.207.36.0. The subnets are internally routed by the switch. The
subnets are assigned different VLAN names, Finance and Personnel,
respectively. The remainder of the traffic belongs to the VLAN named
MyCompany. All ports are members of the VLAN MyCompany.
describes GVRP commands.
.
both