Displaying Ospf Settings - Allied Telesis AT-9108 User Manual

Displaying OSPF Settings

Displaying OSPF Settings
Command
show ospf
show ospf area {<areaid>}
show ospf interfaces {vlan <name> | area
<areaid>}
show ospf lsdb {detail} area [<areaid> |
all] [router | network | summary-net |
summary-asb | as-external | external-
type7 |all]
show ospf virtual-link {<areaid>
<routerid> }
9-24
To display settings for OSPF, use the commands listed in
Table 9-6 OSPF Show Command
Description
Displays global OSPF information.
Displays information about a particular OSPF area,
or all OSPF areas.
Displays information about one or all OSPF
interfaces. If no argument is specified, all OSPF
interfaces are displayed.
Displays a table of the current LSDB. You can filter
the display using either the area ID, the remote
router ID, or the link-state ID. The default setting is
all with no detail. If detail is specified, each
entry includes complete LSA information.
Displays virtual link information about a particular
router or all routers.
Table 9-6.