Table of Contents
Advertisement
Using SNMP
Command
config snmp delete [<ipaddress>
{<mask>} | all]
config snmp delete trapreceiver
[<ip_address> community <string> | all]
config snmp syscontact <string>
config snmp sysname <string>
config snmp syslocation <string>
Displaying
SNMP Settings
2-28
Table 2-9 SNMP Configuration Commands (Continued)
To display the SNMP settings configured on the switch, enter the
following command:
show management
This command displays the following information:
Enable/disable state for Telnet, SNMP, and Web access
SNMP community strings
Authorized SNMP station list
SNMP trap receiver list
RMON polling configuration
Login statistics
Description
Deletes the IP address of a specified SNMP
management station or all SNMP management
stations. If you delete all addresses, any machine
can have SNMP management access to the switch.
Deletes the IP address of a specified trap receiver or
all authorized trap receivers.
Configures the name of the system contact. A
maximum of 255 characters is allowed.
Configures the name of the switch. A maximum of
32 characters is allowed. The default sysname is the
model name of the device (for example,
Summit1). The sysname appears in the switch
prompt.
Configures the location of the switch. A maximum
of 255 characters is allowed.
Advertisement
Table of Contents
