Organization; Supported Standards - Allied Telesis AT-9108 User Manual

Organization

Organization
Section Title
Chapter 1, Overview
Chapter 2, Accessing the Switch
Chapter 3, Configuring Switch Ports
Chapter 4, Virtual LANs (VLANs)
Chapter 5, Forwarding Database (FDB)
Chapter 6, Spanning Tree Protocol (STP)
Chapter 7, Quality of Service (QoS)
Chapter 8, IP Unicast Routing
Chapter 9, RIP and OSPF
Chapter 10, IP Multicast Routing
Chapter 11, IPX Routing
Chapter 12, Access Policies
Chapter 13, Status Monitoring and
Statistics
Chapter 14, Software Upgrade and Boot
Options
Appendix A, Supported Standards
Appendix B, Troubleshooting
Preface-iv
This guide is divided into xx chapters and xx appendices, as follows:
Description
A description of the Gigabit switch's software
features and software factory default settings
The basics of managing the Gigabit switches
The procedures to configure the switch ports
A description of VLAN concepts and the
procedures to implement VLANs on the Gigabit
switches
A description of the switch's forwarding
database and the procedures to configure it
An explanation of Spanning Tree features as
implemented by the Gigabit switches
A description of the concept of Quality of Service
(QoS) and the procedures to configure QoS on
the Gigabit switches
The procedures to configure IP routing on
theGigabit switches
A description of the the IP unicast routing
protocols available on the Gigabit switches
A description of IP multicast routing
components and procedures to configure IP
multicast routing on the Gigabit switches
The procedures to configure IPX, IPX/RIP, and
IPX/SAP on the Gigabit switches
The procedures to create access policies on the
Gigabit switches
The procedures on obtaining statistical
information about the Gigabit switches
The procedures to upgrade the switch software
image, load, and save configurations
A list of supported software standards
Problem resolutions