Supported Standards - Allied Telesis AT-9108 User Manual

Gigabit switches at-9108; at-8518; at-8525; at-8550
Hide thumbs Also See for AT-9108:
Table of Contents

Advertisement

Appendix A

Supported Standards

SNMP
MIB-II (RFC 1213)
IP Forwarding MIB (RFC 1354)
Bridge MIB (RFC 1493)
Evolution of Interfaces MIB (RFC 1573)
RIP2 MIB (RFC 1724)
RMON MIB (RFC 1757)
RMON II Probe Configuration MIB (2021)
802.3 MAU MIB (RFC 2239)
802.3 MAU MIB + gigabit (draft-ietf-hubmib-mau-mib-v2-01)
Ether-like MIB (165)
Ether-like MIB + gigabit (draft-ietf-hubmib-etherif-mib-v2-00)
The following is a list of software standards supported by the Gigabit
Ethernet switches from Allied Telesyn.
For more information on drafts of the 802.3 MAU MIB + gigabit and
the Ether-like MIB + gigabit, refer to
http://www.ietf.org/html.charters/hubmib-charter.html on the
World Wide Web.
The IEEE Bridge MIB dot1dTpPortEntry PortInDiscards and
dot1dBasePortEntry counters are not incremented.
Terminal Emulation
Telnet (RFC 854)
HTTP 1.0
Protocols Used for
Administration
UDP (RFC 768)
IP (RFC 791)
ICMP (RFC 792)
TCP (RFC 793)
ARP (RFC 826)
TFTP (RFC 783)
BootP (RFC 1271)
Note
A-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

At-8518At-8525At-8550

Table of Contents