Logging Commands - Allied Telesis AT-9108 User Manual

Gigabit switches at-9108; at-8518; at-8525; at-8550
Hide thumbs Also See for AT-9108:
Table of Contents

Advertisement

Logging
Logging
Commands
Command
enable log display
enable syslog
config log display {<priority>}
config syslog <ip_address> <facility>
{<priority>}
disable log display
disable syslog
show log {<priority>}
show log config
clear counters
clear log {static}
13-10
The commands described in
logging options, reset logging options, display the log, and clear the
log.
Table 13-5 Logging Command
Description
Enables the log display.
Enables logging to a remote syslog host.
Configures the real-time log display. Options include:
priority — Filters the log to display messages
with the selected priority or higher (more critical).
Priorities include critical, emergency, error, alert,
warning, notice, info, and debug. If not specified,
informational priority messages and higher are
displayed.
Configures the syslog host address and filters
messages sent to the syslog host. Options include:
ipaddress — The IP address of the syslog host.
facility — The syslog facility level for local use
(local0 - local7).
priority — Filters the log to display messages
with the selected priority or higher (more critical).
Priorities include critical, emergency, alert, error,
warning, notice, info, and debug. If not specified,
only critical priority messages and are sent to the
syslog host.
Disables the log display.
Disables logging to a remote syslog host.
Displays the current snapshot of the log. Options
include:
priority — Filters the log to display message
with the selected priority or higher (more critical).
Priorities include critical, emergency, alert, error,
warning, notice, info, and debug. If not specified,
informational priority messages and higher are
displayed.
Displays the log configuration, including the syslog
host IP address, the priority level of messages being
logged locally, and the priority level of messages being
sent to the syslog host.
Clears all switch statistics and port counters.
Clears the log. If static is specified, the critical log
messages are also cleared.
Table 13-5
allow you to configure

Advertisement

Table of Contents
loading

This manual is also suitable for:

At-8518At-8525At-8550

Table of Contents