Displaying Stp Settings - Allied Telesis AT-9108 User Manual

Displaying STP Settings

Displaying STP Settings
6-10
To display STP settings, use the following command:
show stpd {<stpd_name>}
This command displays the following information:
STPD name
Bridge ID
STPD configuration information
To display the STP state of a port, use the following
command:
show stpd <stpd_name> port <portlist>
This command displays the following:
STPD port configuration
STPD state (Root Bridge, and so on)
STPD port state (forwarding, blocking, and so on)