Allied Telesis AT-9410GB Installation Manual
  1. Manuals
  2. Brands
  3. Allied Telesis Manuals
  4. Switch
  5. AT-9410GB
  6. Installation manual
Allied Telesis AT-9410GB Installation Manual

Allied Telesis AT-9410GB Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

K
Installation
Guide
PN 613-50289-00 Rev A
Gigabit
Ethernet
Switch
AT-9410GB
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AT-9410GB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Allied Telesis AT-9410GB

Summary of Contents for Allied Telesis AT-9410GB

  • Page 1 Gigabit ® Ethernet Switch AT-9410GB Installation Guide PN 613-50289-00 Rev A...
  • Page 2 Copyright  2002 Allied Telesyn, Inc. 960 Stewart Drive Suite B, Sunnyvale, CA 94085 USA All rights reserved. No part of this publication may be reproduced without prior written permission from Allied Telesyn, Inc. All other product names, company names, logos or other designations mentioned herein are trademarks or registered trademarks of their respective owners.

  • Page 3: Electrical Safety And Emission Statement

    Electrical Safety and Emission Statement Standards: This product meets the following standards. U.S. Federal Communications Commission RADIATED ENERGY Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules.

  • Page 4: Table Of Contents

    Table of Contents Preface ............................................6 How This Guide is Organized ..................................... 6 Document Conventions ...................................... 7 Where to Find Web-based Guides ................................... 8 Contacting Allied Telesyn ....................................9 Management Software Updates ..................................10 Chapter 1 Product Description ......................................11 Summary of Features ......................................11 Location of Components ....................................12 Hardware Features ......................................13 10/100/1000Base-T Twisted Pair Ports ..............................
  • Page 5 Chapter 2 Installation ..........................................39 Installation Safety Precautions ..................................40 Selecting a Site for the Switch ..................................42 Required Cables ........................................43 Unpacking the Switch ......................................44 Installing the Switch on a Desktop ................................45 Installing the Switch in a Rack ..................................46 Installing an Optional GBIC Module ................................48 Cabling the Switch .......................................50 Powering On the Switch ....................................53 Starting a Local Management Session .................................54...

  • Page 6: Preface

    Preface This guide contains instructions on how to install an AT-9410GB Gigabit Ethernet Switch. How This Guide is Organized This manual contains the following chapters and appendices: Chapter 1, Hardware Description, describes the features and components of the switch. Chapter 2, Installation, contains the installation instructions.

  • Page 7: Document Conventions

    AT-9410GB Installation Guide Document Conventions This document uses the following conventions to highlight important information. Note Notes provide additional information. Warning Warnings inform you that performing or omitting a specific action may result in bodily injury. Caution Cautions inform you that performing or omitting a specific action...

  • Page 8: Where To Find Web-Based Guides

    Preface Where to Find Web-based Guides The Allied Telesyn web site at www.alliedtelesyn.com contains the most recent documentation for all Allied Telesyn products. All documents are available as PDF files. You can either view the documents online or download them onto a local workstation or server.

  • Page 9: Contacting Allied Telesyn

    AT-9410GB Installation Guide Contacting Allied Telesyn Telephone To contact Technical Support by telephone, find your country or region in the table below. Support United States and Canada Europe, Africa, and the Middle Tel: 1 800 428 4835 (option 4) East...

  • Page 10: Management Software Updates

    To obtain a copy of an updated management program, you can download the software either from our web site or our FTP server at ftp.alliedtelesyn.com. To use the FTP server, enter ‘anonymous’ for the user name when you log in and your e-mail address...

  • Page 11: Product Description

    Chapter 1 Product Description The AT-9410GB is a Layer 2 Gigabit Ethernet switch. It offers a wide range of features and capabilities, all designed to simplify the task of creating and maintaining a Gigabit Ethernet network. Summary of Features Ten 10/100/1000Base-T ports with RJ-45 connectors...

  • Page 12: Location Of Components

    Product Description Location of Components Figure 1 illustrates the front panel of the AT-9410GB Gigabit Ethernet Switch. RS232 Terminal Port AT-9410GB 12-Port Gigabit Managed Switch 10GbE 10/100Mbps RS232 LINK LINK GBIC1 GBIC2 GBIC Expansion Port LEDs 10/100/1000Base-T Ports Slots System LED Figure 1 AT-9410GB Front Panel Figure 2 illustrates the back panel.

  • Page 13: Hardware Features

    /100Mbps Ports Figure 3 Twisted Pair Ports The AT-9410GB Gigabit Ethernet Switch features 10 twisted pair ports. Type of Connector All of the twisted pair ports feature RJ-45 connectors. (For the port pinout details, refer to RJ-45 Port Pinouts in the next section.)
  • Page 14 Product Description Maximum Distance Each twisted pair port has a maximum operating distance of 100 m (328 ft). Type of Cabling For 10 Mbps operation on the twisted pair ports, Category 3 or better 100 ohm shielded or unshielded twisted pair cabling is required. For 100 or 1000 Mbps operation on the twisted pair ports, Category 5 and Enhanced Category 5 (5E) 100 ohm shielded or unshielded twisted pair cabling is required.
  • Page 15 AT-9410GB Installation Guide RJ-45 Port Pinouts Figure 4 illustrates the pin layout to an RJ-45 connector and port. Figure 4 RJ-45 Connector and Port Pin Layout Table 1 lists the RJ-45 pin signals when a twisted pair port is operating in the MDI configuration.
  • Page 16 Product Description Table 3 lists the RJ-45 connector pins and their signals when a twisted pair port is operating at 1000 Mbps. Table 3 1000 Mbps Pin Signals Pair Signal TX and RX+ TX and RX- TX and RX+ TX and RX+ TX and RX- TX and RX- TX and RX+...

  • Page 17: Gigabit Interface Converter (Gbic) Expansion Slots

    GBIC1 GBIC2 Figure 5 GBIC Expansion Slots The AT-9410GB Gigabit Ethernet Switch has two expansion slots on the front panel, labeled GBIC1 and GBIC2. Each slot can accommodate one optional GBIC module. A GBIC module is a gigabit (1000Base) transceiver. Figure 6 shows an example of a fiber optic GBIC module.

  • Page 18: System Led

    Product Description System LED AT-9410GB 12-Port Gigabit Managed Switch 10GbE 10/100Mbps RS232 System LED Figure 7 System LEDs The system LED is defined in Table 4. Table 4 System LEDs State Description Power Amber The switch is booting up or downloading software.

  • Page 19: 10/100/1000 Mbps Port Leds

    AT-9410GB Installation Guide 10/100/1000 Mbps Port LEDs 10GbE 10/100Mbps Port LEDs Figure 8 10/100/1000 Mbps Port LEDs The 10/100/1000 Mbps port LEDs on the front panel display port status information for Ports 1 through 10. Each 10/100/1000 Mbps port has four LEDs.

  • Page 20: Gbic Port Leds

    Product Description GBIC Port LEDs LINK LINK GBIC1 GBIC2 GBIC Port LEDs Figure 9 GBIC Port LEDs Ports GBIC1 and GBIC2 each have a LINK LED on the front panel that indicates whether or not the GBIC expansion slot is in use. The GBIC LINK LEDs are defined in Table 6.

  • Page 21: Rs232 Terminal Port

    Note You are not required to manage an AT-9410GB Gigabit Ethernet Switch. The default switch settings may be sufficient for your network, in which case you can use the unit as an unmanaged switch.

  • Page 22: Ac Power Connector

    Product Description AC Power Connector 100-240VAC Figure 11 AC Power Connector The switch has a single AC power supply socket on the back panel, which has auto-switch AC inputs. Refer to Appendix A, Technical Specifications, for the input voltage range. The unit does not have a power switch.

  • Page 23: Software Features

    All of the features described here are further described in the AT-S45 Management Software User’s Guide. AT-S45 The AT-9410GB Gigabit Ethernet Switch comes with the AT-S45 management software pre-installed. This management software comes Management with default values for all the operating parameters for the switch. In...
  • Page 24 Once the session has been established using “manager” as both the default login name and default password, the management software’s Main Menu is displayed on the terminal’s screen, as shown in Figure 13. AT-9410GB Local Management System Main Menu [G]eneral Information [B]asic Switch Configuration...
  • Page 25 AT-9410GB Installation Guide Web Browser You can also manage the switch from a workstation on your network using a web browser, such as Netscape Navigator. This is referred to as remote or in-band management. To start a web browser management session, you simply enter the switch’s IP address in the URL field of the web browser, as shown in...

  • Page 26: Spanning Tree Protocol (Stp)

    So not only does STP guard against multiple links between end nodes, but it also activates backup redundant paths in case a main link fails. STP is disabled by default on the AT-9410GB Gigabit Ethernet Switch. Note The AT-9410GB Gigabit Ethernet Switch supports only one STP domain.

  • Page 27: Tagged And Port-Based Vlans

    This allows you to group together network devices that, though physically separated by large distances, will function as if they are a part of the same physical LAN. The AT-9410GB Gigabit Ethernet Switch supports two types of VLANs: Port-based VLANs Tagged VLANs The AT-9410GB Gigabit Ethernet Switch comes configured with one port-based VLAN, called the Default VLAN.

  • Page 28: Igmp Snooping

    The IGMP snooping feature on the AT-9410GB Switch enables the unit to monitor the flow of queries from the router and reports from the host nodes to build its own multicast membership lists. It uses the lists to forward multicast packets only to switch ports where there are host nodes that are members of multicast groups.

  • Page 29: Dynamic Host Configuration Protocol (Dhcp)

    (DHCP) The AT-9410GB Gigabit Ethernet Switch supports this protocol and can obtain its IP configuration information from a DHCP server on your network. If you activate this feature, the switch will seek its IP address, subnet mask, and gateway from a DHCP server.
  • Page 30 9410GB switch you had chosen ports 1, 2, 3, and 4. To maintain the order of the port connections, you would connect port 2 on the first AT-9410GB switch to port 1 on the second AT- 9410GB, port 3 to port 2, and so on.
  • Page 31 AT-9410GB Installation Guide Example of a Port Trunk Figure 16 shows an example of a port trunk between an AT-9410GB and a network server. The server is connected to the switch with four data links. The links are connected to ports 1 through 4 on the switch.

  • Page 32: Port Security

    This security level can prevent unauthorized individuals from connecting to your network and gaining access to network resources. For example, if an AT-9410GB port is connected to an Ethernet hub with four workstations attached, you can configure the switch port to learn only four MAC addresses.

  • Page 33: A Few Basics To Ethernet Switching

    NIC already has a MAC address assigned to it by its manufacturer. The AT-9410GB Gigabit Ethernet Switch contains an 8 kilobyte MAC address table. The switch uses the table to store the MAC addresses of the network nodes connected to its ports, along with the port number on which each address was learned.

  • Page 34: Duplex Mode

    Each port on an AT-9410GB Switch can operate in either half- or full- duplex mode. The ports are IEEE 802.3u-compliant and will Auto- Negotiate the duplex mode setting for you.
  • Page 35 AT-9410GB Installation Guide How a switch signals an end node to stop transmitting data differs depending on the speed and duplex mode of the end node and switch port. A twisted pair port operating at 100 Mbps and half-duplex mode stops an end node from transmitting data by forcing a collision.

  • Page 36: Network Topologies

    The topology shown in Figure 18 is commonly referred to as a power workgroup topology. Each workstation or node is connected directly to Workgroup a port on an AT-9410GB Gigabit Ethernet Switch, giving each node a Topology dedicated data link to the switch for best performance and reliability.

  • Page 37: Collapsed Backbone - Switch Topology 1

    AT-9410GB Installation Guide Collapsed The AT-9410GB switch can be used to create a 1000 Mbps backbone for the other switches in your network. In the topology illustrated below, Backbone - several AT-8224XL Fast Ethernet Switches, each of which contain a...

  • Page 38: Collapsed Backbone - Switch Topology 2

    Product Description Collapsed If you need to connect multiple AT-9410GB switches and the switches are physically separated by large distances, you can install fiber optic Backbone - GBIC modules. The modules can span large distances and, since they Switch operate a 1000 Mbps, can be used to build a fast backbone between the Topology 2 switches.

  • Page 39: Chapter 2 Installation

    Chapter 2 Installation This chapter contains the installation procedures for the switch. This chapter contains the following sections: Installation Safety Precautions Selecting a Site for the Switch Required Cables Unpacking the Switch Installing the Switch on a Desktop Installing the Switch in a Rack Installing a GBIC Expansion Module Cabling the Switch Powering on the Switch...

  • Page 40: Installation Safety Precautions

    Refer to Translated Electrical Safety and Emission Information on page 65 for translated safety statements in your language. (The laser warnings apply only if you purchased an optional fiber optic GBIC module for the AT-9410GB switch.) Laser Class 1 laser product.
  • Page 41 AT-9410GB Installation Guide Caution All Countries: Install this product in accordance with local and national electric codes.

  • Page 42: Selecting A Site For The Switch

    Installation Selecting a Site for the Switch Observe the following requirements when choosing a site for your switch: If you plan to install the switch in an equipment rack, check to be sure that the rack is safely secured and that it will not tip over. Devices in a rack should be installed starting at the bottom, with the heavier devices near the bottom of the rack.

  • Page 43: Required Cables

    Note The ports on the AT-9410GB switch are IEEE 802.3ab-compatible and are configured automatically by the switch as MDI or MDI-X when connected to a 10 Mbps or 100 Mbps end node. This allows you to use either a straight-through or cross-over cable.

  • Page 44: Unpacking The Switch

    3. Make sure the following hardware components are included in your switch package. If any item is missing or damaged, contact your Allied Telesyn sales representative for assistance. One AT-9410GB Gigabit Ethernet Switch Two mounting brackets Eight Phillips-head screws Four rubber feet...

  • Page 45: Installing The Switch On A Desktop

    AT-9410GB Installation Guide Installing the Switch on a Desktop Perform the following procedure to install the switch on a desktop or table. If you would prefer to install the switch in a rack, go to the next procedure: 1. Place the unit upside down on a level, secure surface.

  • Page 46: Installing The Switch In A Rack

    Installation Installing the Switch in a Rack Perform the following procedure to install the switch in a standard 19- inch rack. If you are not installing the switch in a rack, go to the next procedure: 1. Attach a rack-mounting bracket to one side of the switch using four of the screws that came with the switch.
  • Page 47 AT-9410GB Installation Guide 3. Mount the switch in a19-inch rack using standard screws (not provided), as shown in Figure 22. R S 2 3 P W R Figure 22 Attaching Rackmounting Brackets...

  • Page 48: Installing An Optional Gbic Module

    Installation Installing an Optional GBIC Module If you purchased an optional GBIC module, perform the following procedure. If you did not purchase an optional module, go to the next procedure. 1. Unpack the GBIC module from its shipping container and store the packaging material in a safe location.
  • Page 49 AT-9410GB Installation Guide 3. Slide the GBIC module into one of the expansion slots in the front of the AT-9410GB Switch. The GBIC module is completely seated in the slot when it clicks into place. Figure 23 Installing a GBIC Module...

  • Page 50: Cabling The Switch

    Installation Cabling the Switch Perform the following procedure to connect the data cables to the switch ports. Refer to Required Cables on page 43 for cable specifications. 1. Connect the twisted pair cables to the RJ-45 ports on the switch, as shown in Figure 24.
  • Page 51 AT-9410GB Installation Guide If you are creating a port trunk, do not connect the cables of the trunk to the switch until after you have configured the trunk using the switch’s management software. Connecting the trunk cables to the switch before you have configured the software will result in a data loop, which can adversely affect network performance.
  • Page 52 Installation 3. Attach the fiber optic data cable to the port on the GBIC module. Figure 26 Attaching a Fiber Optic Cable to a GBIC Module When you attach a fiber optic cable to a GBIC module, be sure to observe the following guidelines: You should verify that you are using the appropriate type of fiber optic cabling.

  • Page 53: Powering On The Switch

    AT-9410GB Installation Guide Powering On the Switch 1. Apply AC power to the switch by plugging the power cord into the AC power connector on the back panel of the unit and plugging the other end into a wall outlet.

  • Page 54: Starting A Local Management Session

    Starting a Local Management Session The procedure in this section explains how to start a local (out-of-band) management session by cabling the RS-232 Terminal Port on the front panel of the switch and setting the appropriate terminal values. You can use a local management session to configure the switch’s operating parameters and view performance and error statistics.
  • Page 55 Figure 29. Enter the login name and password. The default login name and password are both “manager.” For instructions on how to change the password, refer to the AT-S45 Management Software User’s Guide. AT-9410GB Management System Version 1.00E Local - Console Allied Telesyn International Corp. Copyright, 2001...
  • Page 56 Installation The switch then displays the management software’s Main Menu, shown in Figure 30. AT-9410GB Local Management System Main Menu [G]eneral Information [B]asic Switch Configuration... [A]dvanced Switch Configuration... Switch [T]ools... [S]tatistics [Q]uit Command> Enter the character in square brackets to select option...

  • Page 57: Warranty Registration

    AT-9410GB Installation Guide Warranty Registration When you have finished installing the switch, register your product by completing the enclosed warranty card and sending it in or by visiting our web site and completing the on-line registration form.

  • Page 58: Chapter 3 Troubleshooting

    Chapter 3 Troubleshooting This chapter contains information on how to troubleshoot the switch in the event a problem occurs. Note If after following the instructions in this chapter you are unable to resolve the problem, contact Allied Telesyn Technical Support for assistance.
  • Page 59 AT-9410GB Installation Guide Check that the twisted pair cable is securely connected to the port on the switch and to the port on the end node. Make sure that the twisted pair cable does not exceed 100 meters (328 feet).
  • Page 60 Troubleshooting acceptable limits. For specifications on the transceiver in the GBIC module, refer to the GBIC Installation Guide. Check that the operating specifications (for instance, wavelength and maximum operating distance) of the fiber optic port on the remote end node are compatible with the fiber optic port on the GBIC module.

  • Page 61: Technical Specifications

    Appendix A Technical Specifications Physical Specifications Dimensions 44 cm x 25.3 cm x 4.32 cm (W x D x (17.32 in. x 9.96 in. x 1.7 in.) Weight 3.98 kg (8.77 lbs) Recommended Minimum Ventilation on All Sides 5.08 cm (2.0 in.) Environmental Specifications Operating Temperature 0°...

  • Page 62: Safety And Electromagnetic Emissions Certifications

    Technical Specifications Safety and Electromagnetic Emissions Certifications Safety UL 1950 (UL/cUL), EN60950 FCC Class A, EN55022, CE Class A, CISPR22 Class A (VCCI), AS/NZS3548 (C-TICK), EN61000-3-2, EN61000-3-3 Immunity EN55024 Quality and Reliability MTBF > 65,403 hrs, MTTR < 1 hr, DOA <...

  • Page 63: Default Switch Settings

    Appendix B Default Switch Settings This appendix lists factory default settings for the switch. Setting Default IP Address 0.0.0.0 Subnet Mask 0.0.0.0 Gateway Address 0.0.0.0 DHCP Disabled IGMP Snooping Disabled System Name None MAC Aging Time 300 seconds Spanning Tree Protocol Status Disabled Bridge Priority...
  • Page 64 Default Switch Settings Setting Default VLANs Port-based and Tagged VLANs Enabled VLAN Name Default VLAN (all ports) Default VLAN ID RS-232 Terminal Port Emulation Mode VT100 Data Bits Stop Bits Parity None Flow Control None Data Rate 9600 bps Key Mode Terminal (not Windows) Software Management Access Login Name...

  • Page 65: Translated Electrical Safety And Emission Information

    Appendix C Translated Electrical Safety and Emission Information Important: This appendix contains multiple-language translations for the safety statements in this guide. Wichtig: Dieser Anhang enthält Übersetzungen der in diesem Handbuch enthaltenen Sicherheitshinweise in mehreren Sprachen. Vigtigt: Dette tillæg indeholder oversættelser i flere sprog af sikkerhedsadvarslerne i denne håndbog.
  • Page 66 Translated Electrical Safety and Emission Information Standards: This product meets the following safety standards. U.S. Federal Communications Commission RADIATED ENERGY Note: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 67 AT-9410GB Installation Guide PLUGGABLE EQUIPMENT, the socket outlet shall be installed near the equipment and shall be easily accessible. CAUTION: Air vents must not be blocked and must have free access to the room ambient air for cooling. OPERATING TEMPERATURE: This product is designed for a maximum ambient temperature of 40°...
  • Page 68 Translated Electrical Safety and Emission Information Normen: Dieses Produkt erfüllt die Anforderungen der nachfolgenden Normen. Hochfrequenzstörung FCC Klasse A, EN55022 Klasse A, CISPR22 Class A (VCCI), AS/NZS3548 (C-TICK), EN61000-3-2, EN61000-3-3 WARNUNG: Bei Verwendung zu Hause kann dieses Produkt Funkstörungen hervorrufen. In diesem Fall müßte der Anwender angemessene Gegenmaßnahmen ergreifen.
  • Page 69 AT-9410GB Installation Guide Standarder: Dette produkt tilfredsstiller de følgende standarder. Radiofrekvens forstyrrelsesemission FCC Klasse A, EN55022 Klasse A, CISPR22 Class A (VCCI), AS/NZS3548 (C-TICK), EN61000-3-2, EN61000-3-3 ADVARSEL: I et hjemligt miljø kunne dette produkt forårsage radio forstyrrelse. Bliver det tilfældet, påkræves brugeren muligvis at tage tilstrækkelige foranstaltninger.
  • Page 70 Translated Electrical Safety and Emission Information Eisen: Dit product voldoet aan de volgende eisen. RFI Emissie FCC Klasse A, EN55022 Klasse A, CISPR22 Class A (VCCI), AS/NZS3548 (C-TICK), EN61000-3-2, EN61000-3-3 WAARSCHUWING: Binnenshuis kan dit product radiostoring veroorzaken, in welk geval de gebruiker verplicht kan worden om gepaste maatregelen te nemen. Immuniteit EN55024 Electrische Veiligheid...
  • Page 71 AT-9410GB Installation Guide Normes: ce produit est conforme aux normes de suivantes: Emission d’interférences radioélectriques FCC Classe A, EN55022 Classe A, CISPR22 Class A (VCCI), AS/NZS3548 (C-TICK), EN61000-3-2, EN61000-3-3 MISE EN GARDE : dans un environnement domestique, ce produit peut provoquer des interférences radioélectriques.
  • Page 72 Translated Electrical Safety and Emission Information Standardit: Tämä tuote on seuraavien standardien mukainen. Radioaaltojen häirintä FCC Luokka A, EN55022 Luokka A, CISPR22 Class A (VCCI), AS/NZS3548 (C-TICK), EN61000-3-2, EN61000-3-3 VAROITUS: Kotiolosuhteissa tämä laite voi aiheuttaa radioaaltojen häiröitä, missä tapauksessa laitteen käyttäjän on mahdollisesti ryhdyttävä tarpeellisiin toimenpiteisiin.
  • Page 73 AT-9410GB Installation Guide Standard: Questo prodotto è conforme ai seguenti standard. Emissione RFI (interferenza di radiofrequenza) FCC Classe A, EN55022 Classe A, CISPR22 Class A (VCCI), AS/ NZS3548 (C-TICK), EN61000-3-2, EN61000-3-3 AVVERTENZA: in ambiente domestico questo prodotto potrebbe causare radio interferenza.
  • Page 74 Translated Electrical Safety and Emission Information Sikkerhetsnormer: Dette produktet tilfredsstiller følgende sikkerhetsnormer. RFI stråling FCC Klasse A, EN55022 Klasse A, CISPR22 Class A (VCCI), AS/NZS3548 (C-TICK), EN61000-3-2, EN61000-3-3 ADVARSEL: Hvis dette produktet benyttes til privat bruk, kan produktet forårsake radioforstyrrelse. Hvis dette skjer, må brukeren ta de nødvendige forholdsregler. Immunitet EN55024 Elektrisk sikkerhet...
  • Page 75 AT-9410GB Installation Guide Padrões: Este produto atende aos seguintes padrões. Emissão de interferência de radiofrequência FCC Classe A, EN55022 Classe A, CISPR22 Class A (VCCI), AS/ NZS3548 (C-TICK), EN61000-3-2, EN61000-3-3 AVISO: Num ambiente doméstico este produto pode causar interferência na radiorrecepção e, neste caso, pode ser necessário que o utente tome as medidas...
  • Page 76 Translated Electrical Safety and Emission Information Estándares: Este producto cumple con los siguientes estándares. Emisión RFI FCC Clase A, EN55022 Clase A, CISPR22 Class A (VCCI), AS/NZS3548 (C-TICK), EN61000-3-2, EN61000-3-3 ADVERTENCIA: en un entorno doméstico, este producto puede causar radiointerferencias, en cuyo caso, puede requerirse del usuario que tome las medidas que sean convenientes al respecto.
  • Page 77 AT-9410GB Installation Guide Standarder: Denna produkt uppfyller följande standarder. Radiostörning FCC Klass A, EN55022 Klass A, CISPR22 Class A (VCCI), AS/NZS3548 (C-TICK), EN61000-3-2, EN61000-3-3 VARNING: Denna produkt kan ge upphov till radiostörningar i hemmet, vilket kan tvinga användaren till att vidtaga erforderliga åtgärder.

Table of Contents