Disabling And Resetting Stp - Allied Telesis AT-9108 User Manual

Disabling and Resetting STP

Command
delete stpd <stpd_name>
disable stpd [<stpd_name> | all] Disables the STP mechanism on a particular STPD, or for all
disable stpd port <portlist>
unconfig stpd {<stpd_name>}
To disable STP or return STP settings to their defaults, use the
commands listed in
Table 6-2 STP Disable and Reset Commands
Description
Removes an STPD. An STPD can only be removed if all VLANs
have been deleted from it. The default STPD, s0, cannot be
deleted.
STPDs.
Disables STP on one or more ports. Disabling STP on one or
more ports puts those ports in forwarding state; all BPDUs
received on those ports will be disregarded.
Restores default STP values to a particular STPD or to all
STPDs.
AT-9108, AT-8518, AT-8525, and AT-8550 User's Guide
Table 6-2.
6-11