Port Mirroring Commands; Port Mirroring Example - Allied Telesis AT-9108 User Manual

Port Mirroring
Commands
Command
enable mirroring to <port>
config mirroring add [mac <mac_address> |
vlan <name> | port <port> | vlan <name>
port <port>]
config mirroring delete [mac
<mac_address> | vlan <name> | port <port>
| vlan <name> port <port> | all}
disable mirroring
show mirroring
Port Mirroring
Example
Port mirroring commands are described in
Table 3-6 Port Mirroring Configuration Command
The following example selects port 3 as the mirror port, and sends all
traffic coming into or out of the switch on port 1 to the mirror port:
enable mirroring port 3
config mirroring add port 1
The following example sends all traffic coming into or out of the
switch on port 1 and the VLAN default to the mirror port:
config mirroring add port 1 vlan default
AT-9108, AT-8518, AT-8525, and AT-8550 User's Guide
Description
Dedicates a port to be the mirror output port.
Adds a single mirroring filter definition. Up to
eight mirroring definitions can be added. You
can mirror traffic from a MAC address, a VLAN, a
physical port, or a specific VLAN/port
combination.
Deletes a particular mirroring filter definition, or
all mirroring filter definitions.
Disables port-mirroring.
Displays the port-mirroring configuration.
Table 3-6.
3-11