UDP-Forwarding
UDP-Forwarding
Commands
Command
create udp-profile <profile_name>
config udp-profile <profile_name> add
<udp_port> [vlan <name> | ipaddress
<dest_ipaddress>]
config udp-profile <profile-name> delete
<udp_port> [vlan <name> | ipaddress
<dest_ipaddress>]
config vlan <name> udp-profile
<profile_name>
show udp-profile {<profile_name>}
unconfig udp-profile vlan [<name> | all]
delete udp-profile <profile_name>
8-16
Table 8-2
describes the commands used to configure UDP-
forwarding.
Table 8-2 UDP-Forwarding Commands
Description
Creates a UDP-forwarding profile. You must use
a unique name for the UDP-forwarding profile.
Adds a forwarding entry to the specified UDP-
forwarding profile name. All broadcast packets
sent to
the destination IP address (unicast or subnet
directed broadcast) or to the specified VLAN as
an all-ones broadcast.
Deletes a forwarding entry from the specified
udp-profile
Assigns a UDP-forwarding profile to the source
VLAN. Once the UDP profile is associated with
the VLAN, the switch picks up any broadcast
UDP packets that matches with the user
configured UDP port number, and forwards
those packets to the user-defined destination. If
the UDP port is the DHCP/BootP port number,
appropriate DHCP/BootP proxy functions are
invoked.
Displays the profile names, input rules of UDP
port, destination IP address, or VLAN and the
source VLANs to which the profile is applied.
Removes the UDP-forwarding profile
configuration for one or all VLANs.
Deletes a UDP-forwarding profile.
are forwarded to either
<udp_port>
name.