Deleting And Resetting Ip Multicast Settings - Allied Telesis AT-9108 User Manual

Deleting and Resetting IP Multicast Settings

Table 10-4 IP Multicast Routing Reset and Disable Commands
Command
disable dvmrp
disable ipmcforwarding {vlan <name>}
disable igmp {vlan <name>}
disable igmp snooping
disable pim-dm
unconfig dvmrp {vlan <name>}
unconfig igmp
unconfig pim-dm {vlan <name>}
clear igmp snooping {vlan <name>}
clear ipmc cache {<group>
{<src_ipaddress> <mask>}}
To return IP multicast routing settings to their defaults and disable IP
multicast routing functions, use the commands listed in
Description
Disables DVMRP on the system.
Disables IP multicast forwarding.
Disables the router-side IGMP processing on a router
interface. No IGMP query is generated, but the switch
continues to respond to IGMP queries received from
other devices. If no VLAN is specified, IGMP is
disabled on all router interfaces.
Disables IGMP snooping. IGMP snooping can be
disabled only if IP multicast routing is not being used.
Disabling IGMP snooping allows all IGMP and IP
multicast traffic to flood within a given VLAN.
Disables PIM-DM on the system.
Resets the DVMRP timers to their default settings. If
no VLAN is specified, all interfaces are reset.
Resets all IGMP settings to their default values and
clears the IGMP group table.
Resets all PIM-DM settings to their default values.
Removes one or all IGMP snooping entries.
Resets the IP multicast cache table. If no options are
specified, all IP multicast cache entries are flushed.
AT-9108, AT-8518, AT-8525, and AT-8550 User's Guide
Table 10-4.
10-11