Oce XDL Reference Manual page 95

Print Processing
Parameter
FACE-
UP=YES|NO
FACEUP=YES Specifies that the sheets are delivered to the tray/
FACEUP=NO
FEED=
stock-refer-
ence
(only for Cut-
sheet !)
FEED=
stock-name
(only for Cut-
sheet !)
FEED=
MAIN,AUX,
OPR
(only for Cut-
sheet !)
A29247-X4-X-8-7672
Definition(s)
This parameter specifies faceup delivery of pages.
The default is NO.
Note:
This parameter is generally ignored in PRISMApro-
duction (LCDS) which means, that the default-value
(NO) is processed, independently if YES or NO is de-
fined.
However it exists one exception: If NTO1=YES is de-
fined, then always FACEUP=YES is processed, no
matter if NO or YES is defined.
In case of NTO1=n and n exceeds the limit, the sys-
tem acts like NTO1=NO.
output-stacker faceup. FACEUP=YES is executed
unconditionally if NTO1=YES, no matter if FACE-
UP=YES or FACEUP=NO
Specifies that the sheets are delivered to the tray/
output-stacker facedown. FACEUP=NO is executed
unconditionally if NTO1=NO, no matter if FACE-
UP=YES or FACEUP=NO
This is the default-value.
stock-reference
Specifies the stock assigned to a stock-name by the
STOCKSET command in effect at the time the page
is printed. FEED=stock-reference allows users to
change stocks associated with a job, without altering
the stock references in the data application itself.
stock-name
Bypasses the reference feature, but still requires that
the stock-name is specified as present in the current
STOCKSET. (FEED=stock-reference should always
be used.)
MAIN,AUX,OPR
These options provide compatibility to existing appli-
cations. FEED=OPR is equivalent to FEED=MAIN.
The default is MAIN.
Summary of OUTPUT Command Parameters
Offline Online DJDE
Y Y N
Y Y Y
87