Oce XDL Reference Manual page 156

BANNER Command
Parameter
HRPTNA=
NONE
TCOUNT=
value
TEST=
test-exp
TYPE=
DATA
TYPE=
BANNER
148
Definition(s)
NONE
Specifies that no report name is to be selected.
The default is NONE.
value
Specifies the total number of consecutive trailer ban-
ner pages which must be detected to satisfy the test
expression.
The default is 0.
test-exp
The format and syntax of a test-exp are defined in the
"Test expression definition" section. If a test-exp is
satisfied, the page containing the record tested is
considered a banner page.
There is no default.
DATA
For online jobs, used when reports do not contain
user-specified banner pages. This parameter allows
the user to treat selected data page(s) as banner
pages for report separation. This type of banner page
is printed with a form (if specified). In duplex mode,
this type of banner page is printed as a duplex page
with data on the back. If multiple PDE begins are
specified and TYPE=DATA, only the first header
page of the report is repositioned to the first logical
page of a new physical sheet.
BANNER
Should be coded when reports contain user-specified
banner pages. These banner pages are printed with-
out forms. In duplex mode, the banner pages are
printed with blank backs.
The default is BANNER.
Using Logical Processing
Offline Online DJDE
N Y
N Y
N Y
A29247-X4-X-8-7672
N
N
N