Oce XDL Reference Manual page 103

Lcds-module xdl/djde
Table of Contents

Advertisement

Print Processing
Parameter
MODIFY=
(cme-id,[init]
[,copies])
NONE
NTO1=YES |
NO | n
NTO1=YES
A29247-X4-X-8-7672
Summary of OUTPUT Command Parameters (Continuation)
Definition(s)
cme-id
The command identifier of a CME. The CME may be
coded within a JSL or coded and cataloged separate-
ly for use by several JSLs. Any CME invoked by a
DJDE must be cataloged separately (refer to the
"Cataloged CMEs" section in this chapter for further
information). If the CME is within the JSL, it must pre-
cede a reference to its identifier by the MODIFY pa-
rameter. Details on CME usage and syntax are
discussed in the "CME" section of this chapter.
init
Specifies the initial ply (pass) to which the associated
CME is to be applied.
copies
Specifies the number of plies (passes) on which to
apply the CME. If copies is not specified, then the
CME applies to all copies beginning with the copy
number specified by init.
NONE
Specifies that data are processed without modifica-
tion.
The default is NONE.
Specifies, on a report basis, whether all copies of a
particular report are printed last page first (n-to-1).
NTO1 is the command parameter keyword.
The default is NO
Note: When NTO1=YES, XDL overrides COL-
LATE=NO with COLLATE=YES and notes this action
with a warning in the message window.
NTO1=YES causes FACEUP=YES to be specified.
NTO1-printing inhibits the parallel processing of re-
port-processing and report-print-out within one report
but not parallel processing of report-processing and
report-print-out in two different reports. This may
cause a print-out delay in several cases.
This parameter specifies last page first printing. To
print n-to-1, output processing must print the report
starting with the last page.Therefore, report printing
cannot begin until report processing has finished with
the entire report. It is possible, that report processing
does not recognize the end of a report until the start
of the next report (i.e RSTACK-condition or header
banner page or..) is detected. When YES is specified,
the system assumes a 50 sheet threshold.
Offline
Online
DJDE
Y
Y
Y
Y
Y
N
95

Advertisement

Table of Contents
loading

This manual is also suitable for:

DjdePrismaproduction server v3.10

Table of Contents